|Connection size||1" (DN25)|
|Productivity||3 m3 per hour|
|Minimum water pressure||1 bar|
|Maximum water pressure||16 bar|
|Maximum temperature||+95 °C|
|Filtration fineness||5-10 micron|
|Type of filter element||string membrane self-washing|
|Approximate weight||1,1 kg|
Productivity 3 m3 per hour. Connection size 1″ (DN25). The mainline filter with direct-flow washing for the preliminary fine purification of water from mechanical impurities.
The high-performance filter with filtration accuracy of 5-10 microns is designed for filtering liquids up to 3 m3 per hour.
The NEPTUN FM-A03 1″ filter is used for:
filtering water in hot and cold systems water supply industrial and individual use;
Filter for use in water supply systems of apartments, villas, cottages, pools, offices.
The filter element is made of stainless high-alloy steel in the form of p una wound on the frame.
The FM-A03 1″ fine filter consists of a body with an internal thread, a string filter element, a generator, a drain valve, a flask, and a manometer.
The filter has two modes of operation: filtration and washing. In the filtration mode, the water penetrates through the filter element inside and exits already purified. All mechanical impurities remain outside the filter element at the bottom of the flask. The flushing mode is turned on / off by opening the drain valve at the bottom of the flask. During flushing, the water stream removes all accumulated debris from both the surface of the filter element and from the bottom of the flask. The operation of the drain valve can be controlled manually or automatically.
Installation of the filter is possible on plastic and metal pipes. Installing the filter is recommended after the shut-off valves behind the water meter. Maintenance of the filter is made without dismantling. The position of the filter in the vertical position only flask down. Installation in limited space is possible.
NEPTUN FM-A03 1″ fine filter mainline filters are used for domestic and commercial purposes for the continuous supply of filtered cold and hot water at a maximum pressure in the pipeline of up to 16 atm. Prevents foreign bodies from entering the line: rust particles, hemp fibers, grains of sand.