Mainline filter FM-A07 1″
Specifications
| Connection size | 1" (DN25 internal) and 1 1/4" (DN32 external) |
| Productivity | 3,7 m3 per hour |
| Minimum water pressure | 1 bar |
| Maximum water pressure | 16 bar |
| Maximum temperature | +95 °C |
| Filtration fineness | 5-10 micron |
| Type of filter element | string membrane self-washing |
| Dimensions (mm) | 325х110х70 |
| Approximate weight | 2 kg |
Description
Productivity is 3,7 m3 per hour. Connection 1″ female and 1 1/4″ male thread.
Reinforced, larger filter element that allows you to work with increased performance, even very dirty water.
A high-performance filter with filtration accuracy of 5-10 microns is designed for filtering a liquid of 62 l / min (3,7 m3 per hour).
Application:
- Water filtration in hot and cold water supply systems for industrial use: for industrial and drinking water.
- Food filtration: milk, vegetable oils, beer, alcohol, alcohol-containing products;
- Filtration of light petroleum products: gasoline, jet fuel, diesel fuel, technical oils.
Industrial filter is widely used in the water supply systems of apartment buildings, cottages, cottages, orphanages, schools, kindergartens, in the workplace.
The advantage of new technology:
- High cleaning efficiency from mechanical impurities up to 95% of the smallest mechanical suspensions: sand, rust, microorganisms, etc.
- Filtration fineness of water is 5 microns.
- The cartridge-free system does not require consumables.
- Simple direct-flow flushing of 8-10 liters per cycle, without stopping the flow of water.
- Compact size.
- High quality filter materials.
- Service without dismantling.
- Service life over 15 years.
Operating principle
The filter has two modes of operation: filtration and washing.
In the filtration mode, the water penetrates through the filter element inside and exits already purified. All mechanical impurities remain outside the filter element at the bottom of the flask. The rinsing mode is turned on / off by opening the drain valve at the bottom of the flask. During the flushing process, the water flow removes all accumulated debris from both the surface of the filter element and the bottom of the flask. The operation of the drain valve can be controlled manually or automatically.
Materials
- The body and the filter flask are made of brass coated with LS58-2 nickel according to GOST 15527-70 and have high anti-corrosion properties.
- Filtering string element of fine cleaning of high alloy stainless steel
Equipment
- Filter NEPTUN FM-A07
- Pressure gauge
- Wash ball valve
- Passport with Warrenty card
Warranty period – 3 years. Equipment service life is at least 15 years.
Made in Moscow, Russia
Similar products
Productivity 5-10 m3 per hour. Connection size 1 1/2″ (DN40). Industrial main water filter NEPTUN FM-B05 1 1/2 “with direct-flow washing to pre-purify water from mechanical impurities.
A high-performance filter with filtration accuracy of 5-10 microns is designed for filtering liquids from 5 to 10 m3 per hour.
The use of fine mechanical filter:
- water filtration in hot and cold water supply systems for industrial and individual use;
- filtration of food products: milk, vegetable oils, beer, alcohol, alcohol-containing products;
- filtration of light petroleum products: gasoline, aviation kerosene, diesel fuel, technical oils.
Filter for industrial use in the water supply systems of apartment buildings, cottages, cottages, orphanages, schools, kindergartens, in the workplace.
The filter element is made of high-alloyed stainless steel in the form of a string wound on a frame.
Design
The FM-B05 1 1/2 “fine filter consists of a body with an internal thread, a string filter element, a generator, a drain valve, a flask, and a manometer. The drain valve provides a direct-flow washing of the filter.
The filter does not require replaceable cartridges, consumables, is easy to maintain and operate and has a compact size.
Operating principle
The filter has two modes of operation: filtration and washing. In the filtration mode, water penetrates through the filter element inside and exits already purified. All mechanical impurities remain outside the filter element at the bottom of the flask.
The flushing mode is turned on / off by opening the drain valve at the bottom of the flask. During flushing, the water stream removes all the accumulated debris from both the surface of the filter element and from the bottom of the flask. The operation of the drain valve can be controlled manually or automatically.
Materials
- the body and filter flask are made of stamped brass with nickel plated
- brass generator with rare earth magnetic system
- filtering string element of high-purity stainless steel
- NBR seals
Installation
Installation of the filter is possible on plastic and metal pipes. Installation of the filter is recommended after the shut-off valves behind the water meter.
Maintenance of the filter is carried out without dismantling.
The filter is positioned only in a vertical position with the bulb down. Installation is possible in a confined space.
Filter advantage
- high cleaning efficiency
- simple direct flow flushing
- compact size
- service without dismantling
Application
NEPTUN FM-B05 1 1/2″ mainline filters are used for domestic and commercial purposes for the continuous supply of filtered cold water at normal pressure in the pipeline. Prevents foreign bodies from entering the line: rust particles, hemp fibers, grains of sand.
Made in Moscow, Russia
Productivity 100 m3 per hour. Connection size 4″ (flanged DN100). The mainline filter with direct-flow washing for preliminary purification of water from mechanical impurities.
High-performance filter with filtration fineness of 10-15 microns is designed to filter a liquid of 100 m3 per hour.
Under the order we produce filters with filtration subtlety (1-5, 10-15, 30-40, 50-60, 90-100 microns).
The filter is flushed automatically, without stopping the flow of liquid.
Purpose:
- Water filtration in hot and cold water supply systems for industrial use; for technical and drinking water
- Food filtration: milk, vegetable oils, beer, alcohol, alcohol-containing products;
- Filtration of light petroleum products: gasoline, jet fuel, diesel fuel, technical oils.
The industrial filter is widely used in water supply systems of apartment buildings, water utilities, boilers, factories, agriculture, construction, and in manufacturing.
Application area:
- water treatment in apartment buildings, cottages and cottage settlements;
- water purification in pools;
- industrial wastewater treatment;
- boiler plants;
- therm power system;
- food industry;
- oil industry;
- metallurgical industry;
- chemical industry;
- construction industry.
The advantage of new technology:
- High cleaning efficiency from mechanical impurities up to 98% of the smallest mechanical suspensions: sand, rust, microorganisms, etc.
- Water filtration fineness from 10-15 microns.
- The cartridge-free system does not need consumables.
- Simple direct flow flushing of 20-30 liters per cycle, without stopping the flow of water. (for ordinary tap water it is enough to set the cycle of automatic washing 1 time in 4-12 hours)
- Compact size.
- High quality filter materials.
- Service without dismantling.
- Service life more than 30 years.
Operating principle
The filter has two modes of operation: filtration and washing. In the filtration mode, water penetrates through the filter element inside and exits already purified. All mechanical impurities remain outside the filter element at the bottom of the flask.
The flushing mode is turned on / off by opening the drain valve at the bottom of the flask. During flushing, the water stream removes all the accumulated debris from both the surface of the filter element and from the bottom of the flask. The operation of the drain valve can be controlled manually or automatically.
Materials
- the case and filter flask are made of stainless medical steel AISI 304 or AISI 321;
- brass generator with rare earth magnetic system
- filtering string element of high-purity stainless steel
- NBR seals
Equipments
- filter NEPTUN FM-B09
- automatic flushing system
- manual ball valve flushing
- two manometers
- passport and instructions for use
- warranty card
Warranty period 3 years.
Equipment service life not less than 30 years
Made in Moscow, Russia by RTB Company
Productivity is 1.2 m3 per hour. Connection 1/2 “female and 3/4″ male thread.
Reinforced, larger filter element that allows you to work with increased performance, even very dirty water.
A high-performance filter with filtration accuracy of 1-5 microns is designed for filtering a liquid of 20 l / min (1.2 m3 per hour).
The NEPTUN FM-A05 1/2” mainline filter is used for:
- water filtration in hot and cold water supply systems for industrial and individual use;
- Filter for use in water supply systems of apartments, villas, cottages, pools, offices.
The filter element is made of high-alloyed stainless steel in the form of a string wound on a frame.
Equipment design
The FM-A05 1/2″ fine filter consists of a body with an internal thread, a string filter element, a generator, a drain valve, a flask, a pressure gauge. A drain valve provides a direct-flow washing of the filter.
The filter is easy to maintain and operate and has a compact size.
Operating principle
The filter has two modes of operation: filtration and washing. In the filtration mode, water penetrates through the filter element inside and exits already purified. All mechanical impurities remain outside the filter element at the bottom of the flask.
The flushing mode is turned on / off by opening the drain valve at the bottom of the flask. During flushing, the water stream removes all the accumulated debris from both the surface of the filter element and from the bottom of the flask. The operation of the drain valve can be controlled manually or automatically.
Materials
- the body and filter flask are made of stamped brass with nickel plated
- brass generator with rare earth magnetic system
- filtering string element of high-purity stainless steel
- NBR seals
Installation
Installation of the filter is possible on plastic and metal pipes. Installation of the filter is recommended after the shut-off valves behind the water meter.
Maintenance of the filter is carried out without dismantling.
The filter is positioned only in a vertical position with the bulb down. Installation is possible in a confined space.
Filter advantage
- high cleaning efficiency
- simple direct flow flushing
- compact size
- service without dismantling
Application
NEPTUN FM-A05 1/2″ mainline filters are used for domestic and commercial purposes for the continuous supply of filtered cold water at normal pressure in the pipeline. Prevents foreign bodies from entering the line: rust particles, hemp fibers, grains of sand.
MADE IN RUSSIA, MOSCOW
Productivity 300 m3 per hour. Connection size 6″ (flanged DN150). The mainline filter with direct-flow washing for preliminary purification of water from mechanical impurities.
High-performance filter with filtration fineness of 10-15 microns is designed to filter a liquid of 300 m3 per hour.
Under the order we produce filters with filtration subtlety (1-5, 10-15, 30-40, 50-60, 90-100 microns).
The filter is flushed automatically, without stopping the flow of liquid.
Purpose:
- Water filtration in hot and cold water supply systems for industrial use; for technical and drinking water
- Food filtration: milk, vegetable oils, beer, alcohol, alcohol-containing products;
- Filtration of light petroleum products: gasoline, jet fuel, diesel fuel, technical oils.
The industrial filter is widely used in water supply systems of apartment buildings, water utilities, boilers, factories, agriculture, construction, and in manufacturing.
Application area:
- water treatment in apartment buildings, cottages and cottage settlements;
- water purification in pools;
- industrial wastewater treatment;
- boiler plants;
- therm power system;
- food industry;
- oil industry;
- metallurgical industry;
- chemical industry;
- construction industry.
The advantage of new technology:
- High cleaning efficiency from mechanical impurities up to 98% of the smallest mechanical suspensions: sand, rust, microorganisms, etc.
- Water filtration fineness from 10-15 microns.
- The cartridge-free system does not need consumables.
- Simple direct flow flushing of 20-30 liters per cycle, without stopping the flow of water. (for ordinary tap water it is enough to set the cycle of automatic washing 1 time in 4-12 hours)
- Compact size.
- High quality filter materials.
- Service without dismantling.
- Service life more than 30 years.
Operating principle
The filter has two modes of operation: filtration and washing. In the filtration mode, water penetrates through the filter element inside and exits already purified. All mechanical impurities remain outside the filter element at the bottom of the flask.
The flushing mode is turned on / off by opening the drain valve at the bottom of the flask. During flushing, the water stream removes all the accumulated debris from both the surface of the filter element and from the bottom of the flask. The operation of the drain valve can be controlled manually or automatically.
Materials
- the case and filter flask are made of stainless medical steel AISI 304 or AISI 321;
- brass generator with rare earth magnetic system
- filtering string element of high-purity stainless steel
- NBR seals
Equipments
- filter NEPTUN FM-B11
- automatic flushing system
- manual ball valve flushing
- two manometers
- passport and instructions for use
- warranty card
Warranty period 3 years.
Equipment service life not less than 30 years
Made in Moscow, Russia by RTB Company