Home page

Mainline filter FM-A03 1

Mainline filter FM-A03 1
Mainline filter FM-A03 1

Specifications

Connection size 1" (DN25)
Productivity 3 m3 per hour
Minimum water pressure 1 bar
Maximum water pressure 16 bar
Maximum temperature +95 °C
Filtration fineness 5-10 micron
Type of filter element string membrane self-washing
Dimensions (mm) 190х110х50
Approximate weight 1,1 kg
Buy

Description

Productivity 3 m3 per hour. Connection size 1″ (DN25). The mainline filter with direct-flow washing for the preliminary fine purification of water from mechanical impurities.

The high-performance filter with filtration accuracy of 5-10 microns is designed for filtering liquids up to 3 m3 per hour.

The NEPTUN FM-A03 1″ filter is used for:

filtering water in hot and cold systems water supply industrial and individual use;

Filter for use in water supply systems of apartments, villas, cottages, pools, offices.

The filter element is made of stainless high-alloy steel in the form of p una wound on the frame.

Design

The FM-A03 1″ fine filter consists of a body with an internal thread, a string filter element, a generator, a drain valve, a flask, and a manometer.

Operating principle

The filter has two modes of operation: filtration and washing. In the filtration mode, the water penetrates through the filter element inside and exits already purified. All mechanical impurities remain outside the filter element at the bottom of the flask. The flushing mode is turned on / off by opening the drain valve at the bottom of the flask. During flushing, the water stream removes all accumulated debris from both the surface of the filter element and from the bottom of the flask. The operation of the drain valve can be controlled manually or automatically.

Materials

  • the body and filter flask are made of stamped brass with nickel plated
  • brass generator with rare earth magnetic system
  • filtering string element of high-purity stainless steel
  • NBR seals

Installation

Installation of the filter is possible on plastic and metal pipes. Installing the filter is recommended after the shut-off valves behind the water meter. Maintenance of the filter is made without dismantling. The position of the filter in the vertical position only flask down. Installation in limited space is possible.

Advantages of the industrial filter
  • high cleaning efficiency;
  • simple direct flow flushing;
  • compact dimensions;
  • service without dismounting

Application

NEPTUN FM-A03 1″ fine filter mainline filters are used for domestic and commercial purposes for the continuous supply of filtered cold and hot water at a maximum pressure in the pipeline of up to 16 atm. Prevents foreign bodies from entering the line: rust particles, hemp fibers, grains of sand.

Similar products

Mainline filter FM-A03 1
Industrial filter FM-B11 6"

Productivity 300 m3 per hour. Connection size 6″ (flanged DN150). The mainline filter with direct-flow washing for preliminary purification of water from mechanical impurities.

High-performance filter with filtration fineness of 10-15 microns is designed to filter a liquid of 300 m3 per hour.

Under the order we produce filters with filtration subtlety (1-5, 10-15, 30-40, 50-60, 90-100 microns).

The filter is flushed automatically, without stopping the flow of liquid.

Purpose:

  • Water filtration in hot and cold water supply systems for industrial use; for technical and drinking water
  • Food filtration: milk, vegetable oils, beer, alcohol, alcohol-containing products;
  • Filtration of light petroleum products: gasoline, jet fuel, diesel fuel, technical oils.

The industrial filter is widely used in water supply systems of apartment buildings, water utilities, boilers, factories, agriculture, construction, and in manufacturing.

Application area:

  • water treatment in apartment buildings, cottages and cottage settlements;
  • water purification in pools;
  • industrial wastewater treatment;
  • boiler plants;
  • therm power system;
  • food industry;
  • oil industry;
  • metallurgical industry;
  • chemical industry;
  • construction industry.

The advantage of new technology:

  • High cleaning efficiency from mechanical impurities up to 98% of the smallest mechanical suspensions: sand, rust, microorganisms, etc.
  • Water filtration fineness from 10-15 microns.
  • The cartridge-free system does not need consumables.
  • Simple direct flow flushing of 20-30 liters per cycle, without stopping the flow of water. (for ordinary tap water it is enough to set the cycle of automatic washing 1 time in 4-12 hours)
  • Compact size.
  • High quality filter materials.
  • Service without dismantling.
  • Service life more than 30 years.

Operating principle

The filter has two modes of operation: filtration and washing. In the filtration mode, water penetrates through the filter element inside and exits already purified. All mechanical impurities remain outside the filter element at the bottom of the flask.

The flushing mode is turned on / off by opening the drain valve at the bottom of the flask. During flushing, the water stream removes all the accumulated debris from both the surface of the filter element and from the bottom of the flask. The operation of the drain valve can be controlled manually or automatically.

Materials

  • the case and filter flask are made of stainless medical steel AISI 304 or AISI 321;
  • brass generator with rare earth magnetic system
  • filtering string element of high-purity stainless steel
  • NBR seals

Equipments

  • filter NEPTUN FM-B11
  • automatic flushing system
  • manual ball valve flushing
  • two manometers
  • passport and instructions for use
  • warranty card

Warranty period 3 years.

Equipment service life not less than 30 years

Made in Moscow, Russia by RTB Company

About
Mainline filter FM-A03 1
Industrial filter FM-B12 8"

Productivity 500 m3 per hour. Connection size 8″ (flanged DN200). The mainline filter with direct-flow washing for preliminary purification of water from mechanical impurities.

High-performance filter with filtration fineness of 50 microns is designed to filter a liquid of 500 m3 per hour.

Under the order we produce filters with filtration subtlety (1-5, 10-15, 30-40, 50-60, 90-100 microns).

The filter is flushed automatically, without stopping the flow of liquid.

Purpose:

  • Water filtration in hot and cold water supply systems for industrial use; for technical and drinking water
  • Food filtration: milk, vegetable oils, beer, alcohol, alcohol-containing products;
  • Filtration of light petroleum products: gasoline, jet fuel, diesel fuel, technical oils.

The industrial filter is widely used in water supply systems of apartment buildings, water utilities, boilers, factories, agriculture, construction, and in manufacturing.

Application area:

  • water treatment in apartment buildings, cottages and cottage settlements;
  • water purification in pools;
  • industrial wastewater treatment;
  • boiler plants;
  • therm power system;
  • food industry;
  • oil industry;
  • metallurgical industry;
  • chemical industry;
  • construction industry.

The advantage of new technology:

  • High cleaning efficiency from mechanical impurities up to 98% of the smallest mechanical suspensions: sand, rust, microorganisms, etc.
  • Water filtration fineness from 50 microns.
  • The cartridge-free system does not need consumables.
  • Simple direct flow flushing of 30-38 liters per cycle, without stopping the flow of water. (for ordinary tap water it is enough to set the cycle of automatic washing 1 time in 4-12 hours)
  • Compact size.
  • High quality filter materials.
  • Service without dismantling.
  • Service life more than 30 years.

Operating principle

The filter has two modes of operation: filtration and washing. In the filtration mode, water penetrates through the filter element inside and exits already purified. All mechanical impurities remain outside the filter element at the bottom of the flask.

The flushing mode is turned on / off by opening the drain valve at the bottom of the flask. During flushing, the water stream removes all the accumulated debris from both the surface of the filter element and from the bottom of the flask. The operation of the drain valve can be controlled manually or automatically.

Materials

  • the case and filter flask are made of stainless medical steel AISI 304 or AISI 321;
  • brass generator with rare earth magnetic system
  • filtering string element of high-purity stainless steel
  • NBR seals

Equipments

  • filter NEPTUN FM-B12
  • automatic flushing system
  • manual ball valve flushing
  • two manometers
  • passport and instructions for use
  • warranty card

Warranty period 3 years.

Equipment service life not less than 30 years

Made in Moscow, Russia by RTB Company

About
Mainline filter FM-A03 1
Industrial filter FM-B08 3"

Productivity 60 m3 per hour. Connection size 3″ (flanged DN80). The mainline filter with direct-flow washing for preliminary purification of water from mechanical impurities.

High-performance filter with filtration fineness of 10-15 microns is designed to filter a liquid of 60 m3 per hour.

Under the order we produce filters with filtration subtlety (1-5, 10-15, 30-40, 50-60, 90-100 microns).

The filter is flushed automatically, without stopping the flow of liquid.

Purpose:

  • Water filtration in hot and cold water supply systems for industrial use; for technical and drinking water
  • Food filtration: milk, vegetable oils, beer, alcohol, alcohol-containing products;
  • Filtration of light petroleum products: gasoline, jet fuel, diesel fuel, technical oils.

The industrial filter is widely used in water supply systems of apartment buildings, water utilities, boilers, factories, agriculture, construction, and in manufacturing.

Application area:

  • water treatment in apartment buildings, cottages and cottage settlements;
  • water purification in pools;
  • industrial wastewater treatment;
  • boiler plants;
  • therm power system;
  • food industry;
  • oil industry;
  • metallurgical industry;
  • chemical industry;
  • construction industry.

The advantage of new technology:

  • High cleaning efficiency from mechanical impurities up to 98% of the smallest mechanical suspensions: sand, rust, microorganisms, etc.
  • Water filtration fineness from 10-15 microns.
  • The cartridge-free system does not need consumables.
  • Simple direct flow flushing of 18-25 liters per cycle, without stopping the flow of water. (for ordinary tap water it is enough to set the cycle of automatic washing 1 time in 4-12 hours)
  • Compact size.
  • High quality filter materials.
  • Service without dismantling.
  • Service life more than 30 years.

Operating principle

The filter has two modes of operation: filtration and washing. In the filtration mode, water penetrates through the filter element inside and exits already purified. All mechanical impurities remain outside the filter element at the bottom of the flask.

The flushing mode is turned on / off by opening the drain valve at the bottom of the flask. During flushing, the water stream removes all the accumulated debris from both the surface of the filter element and from the bottom of the flask. The operation of the drain valve can be controlled manually or automatically.

Materials

  • the case and filter flask are made of stainless medical steel AISI 304 or AISI 321;
  • brass generator with rare earth magnetic system
  • filtering string element of high-purity stainless steel
  • NBR seals

Equipments

  • filter NEPTUN FM-B08
  • automatic flushing system
  • manual ball valve flushing
  • two manometers
  • passport and instructions for use
  • warranty card

Warranty period 3 years.

Equipment service life not less than 30 years

Made in Moscow, Russia by RTB Company

About
Mainline filter FM-A03 1
Mainline filter FM-A06 3/4"

Productivity is 4 m3 per hour. Connection 1/2″ female and 3/4″ male thread.

Reinforced, larger filter element that allows you to work with increased performance, even very dirty water.
A high-performance filter with filtration accuracy of 1-5 microns is designed for filtering a liquid of 60 l / min (4 m3 per hour).

The NEPTUN FM-A06 3/4″ filter is used for:

  • water filtration in hot and cold water supply systems for industrial and individual use;
  • Filter for use in water supply systems of apartments, villas, cottages, pools, offices.

The filter element is made of high-alloyed stainless steel in the form of a string wound on a frame.

Equipment design

The FM-A06 3/4″ fine filter consists of a body with an internal thread, a string filter element, a generator, a drain valve, a flask, a pressure gauge. A drain valve provides a direct-flow washing of the filter.

The filter is easy to maintain and operate and has a compact size.

Operating principle

The filter has two modes of operation: filtration and washing. In the filtration mode, water penetrates through the filter element inside and exits already purified. All mechanical impurities remain outside the filter element at the bottom of the flask.

The flushing mode is turned on / off by opening the drain valve at the bottom of the flask. During flushing, the water stream removes all the accumulated debris from both the surface of the filter element and from the bottom of the flask. The operation of the drain valve can be controlled manually or automatically.

Materials

  • the body and filter flask are made of stamped brass with nickel plated
  • brass generator with rare earth magnetic system
  • filtering string element of high-purity stainless steel
  • NBR seals

Installation

Installation of the filter is possible on plastic and metal pipes. Installation of the filter is recommended after the shut-off valves behind the water meter.

Maintenance of the filter is carried out without dismantling.

The filter is positioned only in a vertical position with the bulb down. Installation is possible in a confined space.

Filter advantage

  • high cleaning efficiency
  • simple direct flow flushing
  • compact size
  • service without dismantling

Application

NEPTUN FM-A06 3/4″ mainline filters are used for domestic and commercial purposes for the continuous supply of filtered cold water at normal pressure in the pipeline. Prevents foreign bodies from entering the line: rust particles, hemp fibers, grains of sand.

Made in Russia, Moscow

About