Home page

String mainline filters

Mainline filter FM-A03 1
Mainline filter FM-A03 1

Productivity 3 m3 per hour. Connection size 1″ (DN25). The mainline filter with direct-flow washing for the preliminary fine purification of water from mechanical impurities.

The high-performance filter with filtration accuracy of 5-10 microns is designed for filtering liquids up to 3 m3 per hour.

The NEPTUN FM-A03 1″ filter is used for:

filtering water in hot and cold systems water supply industrial and individual use;

Filter for use in water supply systems of apartments, villas, cottages, pools, offices.

The filter element is made of stainless high-alloy steel in the form of p una wound on the frame.

Design

The FM-A03 1″ fine filter consists of a body with an internal thread, a string filter element, a generator, a drain valve, a flask, and a manometer.

Operating principle

The filter has two modes of operation: filtration and washing. In the filtration mode, the water penetrates through the filter element inside and exits already purified. All mechanical impurities remain outside the filter element at the bottom of the flask. The flushing mode is turned on / off by opening the drain valve at the bottom of the flask. During flushing, the water stream removes all accumulated debris from both the surface of the filter element and from the bottom of the flask. The operation of the drain valve can be controlled manually or automatically.

Materials

  • the body and filter flask are made of stamped brass with nickel plated
  • brass generator with rare earth magnetic system
  • filtering string element of high-purity stainless steel
  • NBR seals

Installation

Installation of the filter is possible on plastic and metal pipes. Installing the filter is recommended after the shut-off valves behind the water meter. Maintenance of the filter is made without dismantling. The position of the filter in the vertical position only flask down. Installation in limited space is possible.

Advantages of the industrial filter
  • high cleaning efficiency;
  • simple direct flow flushing;
  • compact dimensions;
  • service without dismounting

Application

NEPTUN FM-A03 1″ fine filter mainline filters are used for domestic and commercial purposes for the continuous supply of filtered cold and hot water at a maximum pressure in the pipeline of up to 16 atm. Prevents foreign bodies from entering the line: rust particles, hemp fibers, grains of sand.

About
Mainline filter FM-A04 1 1/4
Mainline filter FM-A04 1 1/4

Productivity 5.5 m3 per hour. Connection size 1 1/4″ (DN32). The mainline filter with direct-flow washing for preliminary purification of water from mechanical impurities.

High-performance filter with filtration accuracy of 5-10 microns is designed to filter a liquid of 5.5 m3 per hour.

The NEPTUN FM-A04 1 1/4 “filter is used for:

  • water filtration in hot and cold water supply systems for industrial and individual use;
  • Filter for use in water supply systems of apartments, villas, cottages, pools, offices.

The filter element is made of high-alloyed stainless steel in the form of a string wound on a frame.

Equipment design

The FM-A04 1 1/4 “fine filter consists of a body with an internal thread, a string filter element, a generator, a drain valve, a flask, a pressure gauge. A drain valve provides a direct-flow washing of the filter.

The filter is easy to maintain and operate and has a compact size.

Operating principle

The filter has two modes of operation: filtration and washing. In the filtration mode, water penetrates through the filter element inside and exits already purified. All mechanical impurities remain outside the filter element at the bottom of the flask.

The flushing mode is turned on / off by opening the drain valve at the bottom of the flask. During flushing, the water stream removes all the accumulated debris from both the surface of the filter element and from the bottom of the flask. The operation of the drain valve can be controlled manually or automatically.

Materials

  • the body and filter flask are made of stamped brass with nickel plated
  • brass generator with rare earth magnetic system
  • filtering string element of high-purity stainless steel
  • NBR seals

Installation

Installation of the filter is possible on plastic and metal pipes. Installation of the filter is recommended after the shut-off valves behind the water meter.

Maintenance of the filter is carried out without dismantling.

The filter is positioned only in a vertical position with the bulb down. Installation is possible in a confined space.

Filter advantage

  • high cleaning efficiency
  • simple direct flow flushing
  • compact size
  • service without dismantling

Application

NEPTUN FM-A04 1 1/4″ mainline filters are used for domestic and commercial purposes for the continuous supply of filtered cold water at normal pressure in the pipeline. Prevents foreign bodies from entering the line: rust particles, hemp fibers, grains of sand.

About
Mainline filter FM-A05 1/2″
Mainline filter FM-A05 1/2″

Productivity is 1.2 m3 per hour. Connection 1/2 “female and 3/4″ male thread.

Reinforced, larger filter element that allows you to work with increased performance, even very dirty water.

A high-performance filter with filtration accuracy of 1-5 microns is designed for filtering a liquid of 20 l / min (1.2 m3 per hour).

The NEPTUN FM-A05 1/2” mainline filter is used for:

  • water filtration in hot and cold water supply systems for industrial and individual use;
  • Filter for use in water supply systems of apartments, villas, cottages, pools, offices.

The filter element is made of high-alloyed stainless steel in the form of a string wound on a frame.

Equipment design

The FM-A05 1/2″ fine filter consists of a body with an internal thread, a string filter element, a generator, a drain valve, a flask, a pressure gauge. A drain valve provides a direct-flow washing of the filter.

The filter is easy to maintain and operate and has a compact size.

Operating principle

The filter has two modes of operation: filtration and washing. In the filtration mode, water penetrates through the filter element inside and exits already purified. All mechanical impurities remain outside the filter element at the bottom of the flask.

The flushing mode is turned on / off by opening the drain valve at the bottom of the flask. During flushing, the water stream removes all the accumulated debris from both the surface of the filter element and from the bottom of the flask. The operation of the drain valve can be controlled manually or automatically.

Materials

  • the body and filter flask are made of stamped brass with nickel plated
  • brass generator with rare earth magnetic system
  • filtering string element of high-purity stainless steel
  • NBR seals

Installation

Installation of the filter is possible on plastic and metal pipes. Installation of the filter is recommended after the shut-off valves behind the water meter.

Maintenance of the filter is carried out without dismantling.

The filter is positioned only in a vertical position with the bulb down. Installation is possible in a confined space.

Filter advantage

  • high cleaning efficiency
  • simple direct flow flushing
  • compact size
  • service without dismantling

Application

NEPTUN FM-A05 1/2″ mainline filters are used for domestic and commercial purposes for the continuous supply of filtered cold water at normal pressure in the pipeline. Prevents foreign bodies from entering the line: rust particles, hemp fibers, grains of sand.

MADE IN RUSSIA, MOSCOW

About
Mainline filter FM-A06 3/4″
Mainline filter FM-A06 3/4″

Productivity is 4 m3 per hour. Connection 1/2″ female and 3/4″ male thread.

Reinforced, larger filter element that allows you to work with increased performance, even very dirty water.
A high-performance filter with filtration accuracy of 1-5 microns is designed for filtering a liquid of 60 l / min (4 m3 per hour).

The NEPTUN FM-A06 3/4″ filter is used for:

  • water filtration in hot and cold water supply systems for industrial and individual use;
  • Filter for use in water supply systems of apartments, villas, cottages, pools, offices.

The filter element is made of high-alloyed stainless steel in the form of a string wound on a frame.

Equipment design

The FM-A06 3/4″ fine filter consists of a body with an internal thread, a string filter element, a generator, a drain valve, a flask, a pressure gauge. A drain valve provides a direct-flow washing of the filter.

The filter is easy to maintain and operate and has a compact size.

Operating principle

The filter has two modes of operation: filtration and washing. In the filtration mode, water penetrates through the filter element inside and exits already purified. All mechanical impurities remain outside the filter element at the bottom of the flask.

The flushing mode is turned on / off by opening the drain valve at the bottom of the flask. During flushing, the water stream removes all the accumulated debris from both the surface of the filter element and from the bottom of the flask. The operation of the drain valve can be controlled manually or automatically.

Materials

  • the body and filter flask are made of stamped brass with nickel plated
  • brass generator with rare earth magnetic system
  • filtering string element of high-purity stainless steel
  • NBR seals

Installation

Installation of the filter is possible on plastic and metal pipes. Installation of the filter is recommended after the shut-off valves behind the water meter.

Maintenance of the filter is carried out without dismantling.

The filter is positioned only in a vertical position with the bulb down. Installation is possible in a confined space.

Filter advantage

  • high cleaning efficiency
  • simple direct flow flushing
  • compact size
  • service without dismantling

Application

NEPTUN FM-A06 3/4″ mainline filters are used for domestic and commercial purposes for the continuous supply of filtered cold water at normal pressure in the pipeline. Prevents foreign bodies from entering the line: rust particles, hemp fibers, grains of sand.

Made in Russia, Moscow

About
Mainline filter FM-A07 1″
Mainline filter FM-A07 1″

Productivity is 6 m3 per hour. Connection 1″ female and 1 1/4″ male thread.
Reinforced, larger filter element that allows you to work with increased performance, even very dirty water.
A high-performance filter with filtration accuracy of 5-10 microns is designed for filtering a liquid of 100 l / min (6 m3 per hour).

Application:

  • Water filtration in hot and cold water supply systems for industrial use: for industrial and drinking water.
  • Food filtration: milk, vegetable oils, beer, alcohol, alcohol-containing products;
  • Filtration of light petroleum products: gasoline, jet fuel, diesel fuel, technical oils.

Industrial filter is widely used in the water supply systems of apartment buildings, cottages, cottages, orphanages, schools, kindergartens, in the workplace.

The advantage of new technology:

  • High cleaning efficiency from mechanical impurities up to 95% of the smallest mechanical suspensions: sand, rust, microorganisms, etc.
  • Filtration fineness of water is 5 microns.
  • The cartridge-free system does not require consumables.
  • Simple direct-flow flushing of 8-10 liters per cycle, without stopping the flow of water.
  • Compact size.
  • High quality filter materials.
  • Service without dismantling.
  • Service life over 15 years.

Operating principle

The filter has two modes of operation: filtration and washing.
In the filtration mode, the water penetrates through the filter element inside and exits already purified. All mechanical impurities remain outside the filter element at the bottom of the flask. The rinsing mode is turned on / off by opening the drain valve at the bottom of the flask. During the flushing process, the water flow removes all accumulated debris from both the surface of the filter element and the bottom of the flask. The operation of the drain valve can be controlled manually or automatically.

Materials

  • The body and the filter flask are made of brass coated with LS58-2 nickel according to GOST 15527-70 and have high anti-corrosion properties.
  • Filtering string element of fine cleaning of high alloy stainless steel

Equipment

  • Filter NEPTUN FM-A07
  • Pressure gauge
  • Wash ball valve
  • Passport with Warrenty card

Warranty period – 3 years. Equipment service life is at least 15 years.

Made in Moscow, Russia

About
Mainline filter FM-B05 1 1/2″
Mainline filter FM-B05 1 1/2″

Productivity 5-10 m3 per hour. Connection size 1 1/2″ (DN40). Industrial main water filter NEPTUN FM-B05 1 1/2 “with direct-flow washing to pre-purify water from mechanical impurities.

A high-performance filter with filtration accuracy of 5-10 microns is designed for filtering liquids from 5 to 10 m3 per hour.

The use of fine mechanical filter:

  • water filtration in hot and cold water supply systems for industrial and individual use;
  • filtration of food products: milk, vegetable oils, beer, alcohol, alcohol-containing products;
  • filtration of light petroleum products: gasoline, aviation kerosene, diesel fuel, technical oils.

Filter for industrial use in the water supply systems of apartment buildings, cottages, cottages, orphanages, schools, kindergartens, in the workplace.

The filter element is made of high-alloyed stainless steel in the form of a string wound on a frame.

Design

The FM-B05 1 1/2 “fine filter consists of a body with an internal thread, a string filter element, a generator, a drain valve, a flask, and a manometer. The drain valve provides a direct-flow washing of the filter.

The filter does not require replaceable cartridges, consumables, is easy to maintain and operate and has a compact size.

Operating principle

The filter has two modes of operation: filtration and washing. In the filtration mode, water penetrates through the filter element inside and exits already purified. All mechanical impurities remain outside the filter element at the bottom of the flask.

The flushing mode is turned on / off by opening the drain valve at the bottom of the flask. During flushing, the water stream removes all the accumulated debris from both the surface of the filter element and from the bottom of the flask. The operation of the drain valve can be controlled manually or automatically.

Materials

  • the body and filter flask are made of stamped brass with nickel plated
  • brass generator with rare earth magnetic system
  • filtering string element of high-purity stainless steel
  • NBR seals

Installation

Installation of the filter is possible on plastic and metal pipes. Installation of the filter is recommended after the shut-off valves behind the water meter.

Maintenance of the filter is carried out without dismantling.

The filter is positioned only in a vertical position with the bulb down. Installation is possible in a confined space.

Filter advantage

  • high cleaning efficiency
  • simple direct flow flushing
  • compact size
  • service without dismantling

Application

NEPTUN FM-B05 1 1/2″ mainline filters are used for domestic and commercial purposes for the continuous supply of filtered cold water at normal pressure in the pipeline. Prevents foreign bodies from entering the line: rust particles, hemp fibers, grains of sand.

Made in Moscow, Russia

About

Additional equipment