Innovative water filters without replaceable cartridges

Productivity is 1.2 m3 per hour. Connection 1/2 “female and 3/4″ male thread.

Reinforced, larger filter element that allows you to work with increased performance, even very dirty water.

A high-performance filter with filtration accuracy of 1-5 microns is designed for filtering a liquid of 20 l / min (1.2 m3 per hour).

The NEPTUN FM-A05 1/2” mainline filter is used for:

• water filtration in hot and cold water supply systems for industrial and individual use;
• Filter for use in water supply systems of apartments, villas, cottages, pools, offices.

The filter element is made of high-alloyed stainless steel in the form of a string wound on a frame.

Equipment design

The FM-A05 1/2″ fine filter consists of a body with an internal thread, a string filter element, a generator, a drain valve, a flask, a pressure gauge. A drain valve provides a direct-flow washing of the filter.

The filter is easy to maintain and operate and has a compact size.

Operating principle

The filter has two modes of operation: filtration and washing. In the filtration mode, water penetrates through the filter element inside and exits already purified. All mechanical impurities remain outside the filter element at the bottom of the flask.

The flushing mode is turned on / off by opening the drain valve at the bottom of the flask. During flushing, the water stream removes all the accumulated debris from both the surface of the filter element and from the bottom of the flask. The operation of the drain valve can be controlled manually or automatically.

Materials

• the body and filter flask are made of stamped brass with nickel plated
• brass generator with rare earth magnetic system
• filtering string element of high-purity stainless steel
• NBR seals

Installation

Installation of the filter is possible on plastic and metal pipes. Installation of the filter is recommended after the shut-off valves behind the water meter.

Maintenance of the filter is carried out without dismantling.

The filter is positioned only in a vertical position with the bulb down. Installation is possible in a confined space.

Filter advantage

• high cleaning efficiency
• simple direct flow flushing
• compact size
• service without dismantling

Application

NEPTUN FM-A05 1/2″ mainline filters are used for domestic and commercial purposes for the continuous supply of filtered cold water at normal pressure in the pipeline. Prevents foreign bodies from entering the line: rust particles, hemp fibers, grains of sand.

MADE IN RUSSIA, MOSCOW

Productivity 40 m3 per hour. Connection size 2″ (DN50). The mainline filter with direct-flow washing for preliminary purification of water from mechanical impurities.

Industrial main filter with direct flow washing for preliminary purification of water from mechanical impurities. Productivity 40 m3 per hour with filtration fineness 10-15 microns for boiler houses, apartment buildings, cottage villages, food production is the best price / performance option.

Purpose of the filter NEPTUN FM-B07 2 ″ (DN50):

• water filtration in the systems of hot and cold water supply for industrial and individual use, drink water;
• filtration of food: milk, vegetable oils, beer, alcohol, alcohol-containing products;
• filtration of light petroleum products: gasoline, aviation kerosene, diesel fuel, technical oils.

Application area:

• water treatment in apartment buildings, cottages and cottage settlements;
• water purification in pools;
• industrial wastewater treatment;
• boiler plants;
• therm power system;
• food industry;
• oil industry;
• metallurgical industry;
• chemical industry.

Filter design

The fine filter FM-B07 2 ″ (DN50) consists of a body an external thread or flanges, a string filter element, a generator, a drainage tap, a flask, and two manometers.

The filter element is made of high-alloyed stainless steel in the form of a string wound on a frame.

The drain valve provides direct-flow washing of the filter. The filter is easy to maintain and operate and has a compact size.

Operating principle

The filter has two modes of operation: filtration and washing. In the filtration mode, water penetrates through the filter element inside and exits already purified. All mechanical impurities remain outside the filter element at the bottom of the flask. The rinsing mode is turned on / off by opening the drain valve at the bottom of the flask. During the flushing process, the water flow removes all accumulated debris from both the surface of the filter element and the bottom of the flask. The operation of the drain valve can be controlled manually or automatically.

Materials

• the case and filter flask are made of stainless medical steel AISI 304 or AISI 321;
• steel generator with rare earth magnetic system
• filtering string element of high-purity stainless steel
• NBR seals

Installation

Installation of the filter is possible on plastic and metal pipes. Installation of the filter is recommended after the shut-off valves behind the water meter.

Maintenance of the filter is carried out without dismantling.

The filter is positioned only in a vertical position with the bulb down. Installation is possible in a confined space.

Filter advantage

• high cleaning efficiency
• simple direct flow flushing
• compact size
• service without dismantling

Application

NEPTUN FM-B07 2″ mainline filters are used for domestic and commercial purposes for the continuous supply of filtered cold water at normal pressure in the pipeline. Prevents foreign bodies from entering the line: rust particles, hemp fibers, grains of sand.

Made in Moscow, Russia

Warrenty 3 years

Productivity 100 m3 per hour. Connection size 4″ (flanged DN100). The mainline filter with direct-flow washing for preliminary purification of water from mechanical impurities.

High-performance filter with filtration fineness of 10-15 microns is designed to filter a liquid of 100 m3 per hour.

Under the order we produce filters with filtration subtlety (1-5, 10-15, 30-40, 50-60, 90-100 microns).

The filter is flushed automatically, without stopping the flow of liquid.

Purpose:

• Water filtration in hot and cold water supply systems for industrial use; for technical and drinking water
• Food filtration: milk, vegetable oils, beer, alcohol, alcohol-containing products;
• Filtration of light petroleum products: gasoline, jet fuel, diesel fuel, technical oils.

The industrial filter is widely used in water supply systems of apartment buildings, water utilities, boilers, factories, agriculture, construction, and in manufacturing.

Application area:

• water treatment in apartment buildings, cottages and cottage settlements;
• water purification in pools;
• industrial wastewater treatment;
• boiler plants;
• therm power system;
• food industry;
• oil industry;
• metallurgical industry;
• chemical industry;
• construction industry.

The advantage of new technology:

• High cleaning efficiency from mechanical impurities up to 98% of the smallest mechanical suspensions: sand, rust, microorganisms, etc.
• Water filtration fineness from 10-15 microns.
• The cartridge-free system does not need consumables.
• Simple direct flow flushing of 20-30 liters per cycle, without stopping the flow of water. (for ordinary tap water it is enough to set the cycle of automatic washing 1 time in 4-12 hours)
• Compact size.
• High quality filter materials.
• Service without dismantling.
• Service life more than 30 years.

Operating principle

The filter has two modes of operation: filtration and washing. In the filtration mode, water penetrates through the filter element inside and exits already purified. All mechanical impurities remain outside the filter element at the bottom of the flask.

The flushing mode is turned on / off by opening the drain valve at the bottom of the flask. During flushing, the water stream removes all the accumulated debris from both the surface of the filter element and from the bottom of the flask. The operation of the drain valve can be controlled manually or automatically.

Materials

• the case and filter flask are made of stainless medical steel AISI 304 or AISI 321;
• brass generator with rare earth magnetic system
• filtering string element of high-purity stainless steel
• NBR seals

Equipments

• filter NEPTUN FM-B09
• automatic flushing system
• manual ball valve flushing
• two manometers
• passport and instructions for use
• warranty card

Warranty period 3 years.

Equipment service life not less than 30 years

Made in Moscow, Russia by RTB Company

Designed to protect against scale and deposits in:

• water boilers, heat exchangers, boilers, heating systems
• swimming pools, water parks, ornamental ponds, SPA
• washing and dishwashers, coffee machines, water heaters, plumbing

Application area:

• water purification in pools;
• Agriculture;
• fish farming;
• apartments, cottages, private homes;
• small business, cafes, restaurants.

Design

The case of the magnetic converter NEPTUN is made in the form of a pipe made of nickel plated brass and is characterized by high rates of corrosion resistance and the ability to withstand temperature changes.

The case is a magnetic element of rare-earth neodymium alloys.

The main component of the water transducer is a cylindrical magnetic element that creates an axially symmetric polygradient magnetic field. Due to the topography of the field in the magnetic system, a high efficiency of the magnetic field effect on water is achieved.

Operating principle

As a result of magnetic processing, physical and chemical processes take place. This leads to the release of impurities that begin to interact with each other. Calcium ions form microcrystals, but they do not form scale in the heating units, but remain in the water column, then are carried into the drainage. Formed early scale collapses, as calcium ions are detached from it and attached to microcrystals. Thus, old scale is washed out from the surface of pipes or any heating devices.
In order to protect equipment from corrosion, a thin oxide film forms over time on the pipe surfaces.

Installation of water converters NEPTUN

The NEPTUN magnetic water transducer can be used on its own or as part of water treatment systems. It is installed on both cold and hot pipelines (vertically or horizontally).

Main advantages

• high efficiency magnetic water treatment
• full protection of equipment against scale
• use of multipolar magnetic systems
• environmentally friendly method
• protection against scale and corrosion without chemical reagents
• no power consumption
• lack of interchangeable elements
• no maintenance required
• long service life (over 10 years)
• economy
• compact dimensions
• easy installation

Magnetic transducer is best used with string filters.

Made in Moscow, Russia

Designed to protect against scale and deposits in:

• water boilers, heat exchangers, boilers, heating systems
• swimming pools, water parks, ornamental ponds, SPA
• washing and dishwashers, coffee machines, water heaters, plumbing

Application area:

• water purification in pools;
• food industry;
• Agriculture;
• fish farming;
• apartments, cottages, private homes;
• small business, cafes, restaurants, medicine.

Design

The case of the magnetic converter NEPTUN is made in the form of a pipe made of non-magnetic stainless steel 12x18x10 (analogue of AISI 304) and is characterized by high rates of corrosion resistance and the ability to withstand temperature changes.

The case is a magnetic element of rare-earth neodymium alloys.

The main component of the water transducer is a cylindrical magnetic element that creates an axially symmetric polygradient magnetic field. Due to the topography of the field in the magnetic system, a high efficiency of the magnetic field effect on water is achieved.

Operating principle

As a result of magnetic processing, physical and chemical processes take place. This leads to the release of impurities that begin to interact with each other. Calcium ions form microcrystals, but they do not form scale in the heating units, but remain in the water column, then are carried into the drainage. Formed early scale collapses, as calcium ions are detached from it and attached to microcrystals. Thus, old scale is washed out from the surface of pipes or any heating devices.
In order to protect equipment from corrosion, a thin oxide film forms over time on the pipe surfaces.

Installation of water converters NEPTUN

The NEPTUN magnetic water transducer can be used on its own or as part of water treatment systems. It is installed on both cold and hot pipelines (vertically or horizontally).

Main advantages

• high efficiency magnetic water treatment
• full protection of equipment against scale
• use of multipolar magnetic systems
• environmentally friendly method
• protection against scale and corrosion without chemical reagents
• no power consumption
• lack of interchangeable elements
• no maintenance required
• long service life (over 20 years)
• economy
• compact dimensions
• easy installation

Magnetic transducer is best used with string filters.

Made in Moscow, Russia

Designed to protect against scale and deposits in:

• water boilers, heat exchangers, boilers, heating systems
• swimming pools, water parks, ornamental ponds, SPA
• washing and dishwashers, water heaters, plumbing

Application area:

• boiler rooms, heat points, apartment buildings;
• industrial production;
• food industry;
• Agriculture;
• fish farming;
• cottage settlements, water purification in the pools;
• construction of buildings and structures.

Design

The case of the magnetic converter NEPTUN is made in the form of a pipe made of non-magnetic stainless steel 12x18x10 (analogue of AISI 304) and is characterized by high rates of corrosion resistance and the ability to withstand temperature changes.

The case is a magnetic element of rare-earth neodymium alloys.

The main component of the water transducer is a cylindrical magnetic element that creates an axially symmetric polygradient magnetic field. Due to the topography of the field in the magnetic system, a high efficiency of the magnetic field effect on water is achieved.

Operating principle

As a result of magnetic processing, physical and chemical processes take place. This leads to the release of impurities that begin to interact with each other. Calcium ions form microcrystals, but they do not form scale in the heating units, but remain in the water column, then are carried into the drainage. Formed early scale collapses, as calcium ions are detached from it and attached to microcrystals. Thus, old scale is washed out from the surface of pipes or any heating devices.
In order to protect equipment from corrosion, a thin oxide film forms over time on the pipe surfaces.

Installation of water converters NEPTUN

The NEPTUN magnetic water transducer can be used on its own or as part of water treatment systems. It is installed on both cold and hot pipelines (vertically or horizontally).

Main advantages

• high efficiency magnetic water treatment
• full protection of equipment against scale
• use of multipolar magnetic systems
• environmentally friendly method
• protection against scale and corrosion without chemical reagents
• no power consumption
• lack of interchangeable elements
• no maintenance required
• long service life (over 30 years)
• economy
• compact dimensions
• easy installation

Magnetic transducer is best used with NEPTUN string filters.

Made in Moscow, Russia

Universal Water Treatment Complex FMS-A01 NEPTUN (under the sink) is designed to purify drinking water from the finest mechanical suspensions, from virtually all known pollutants, bacteria and viruses, chlorine-containing substances and other impurities, softening, deironing, the final solution to the problem of scale. For apartments, country houses, cottages, restaurants, schools, childcare facilities.

High performance 13 liters per minute or 800 liters per hour!

Universal Water Treatment Complex FMS-A01 NEPTUN is designed to purify drinking water from the finest mechanical suspensions from virtually all known contaminants, bacteria and viruses, chlorine-containing substances and other impurities, softening, deironing, the final solution to the problem of scale. For apartments, country houses, cottages, restaurants, schools, childcare facilities.

It can be used for cleaning tap water in an apartment, cottage, country house, water from wells, wells and even open water bodies.

The water treatment complex FMS-A01 NEPTUN works complete with an amber biomagnetic transducer of the liquid structure, which includes bioenergetically activated materials: rock crystal and amber, which give the natural properties of living water to water.

Purpose

Recommended for regions with water characterized by normal and elevated hardness salts (including regions with ultrahard water), normal and elevated levels of dissolved iron, heavy metals. In particular, the system is effective when used in regions with poor environmental conditions (large cities, industrial centers).

Provides universal cleaning of tap water from common pollutants: mechanical impurities (rust, silt, sand, etc.), dissolved impurities, such as free chlorine, organochlorine compounds, pesticides, herbicides, agricultural fertilizers and their decay products, phenols, oil products, aluminum, heavy metals, radioactive elements, dissolved iron, hardness salts and other organic and inorganic substances, bacteria and viruses. Softens water and completely solves the problem of scale. Eliminates odors, improves the taste of water. The filter “under the sink” already includes cartridges, a separate tap for purified water and everything you need to quickly install the filter at the place of operation.

Innovative string membrane filter element.

The heart of the system is the newest string-membrane filtering element of a new generation of high-alloyed stainless steel, produced in Russia for aircraft and spacecraft. Thanks to the string-membrane mechanism operating with an integrated magnetic generator, an unsurpassed quality of mechanical cleaning up to 1 micron is achieved. Until recently, such mechanical cleaning parameters for contaminants were simply unattainable in non-cartridge-type household systems.

The membrane-membrane filtering element not only cleans of mechanical pollutants, but also protects the water passing through the filter element from all types of infectious agents.

In addition, this string-membrane mechanism belongs to the class of low-pressure membranes, which makes it possible to successfully use it even under low pressure in the water supply system. The system is operational with inlet pressure from 1 atmosphere. High water filtration speeds also save time. For washing the string-membrane mechanism requires no more than 1-2% of water from the consumed water in the tap.

The filter element has been serving for at least 15 years and does not require replacement or repair over its entire service life.

Water after the complex FMS-A01 NEPTUN:

• Normalizes the human immune system.
• Improves cerebral circulation.
• Normalizes biorhythms of the brain, central nervous system and a number of endocrine organs.
• Protects a person from the harmful effects of electromagnetic fields and man-made “smog”.
• Improves mood, endurance and adaptability of people to the effects of adverse environmental factors.
• Provides gradual suppression and death of viruses, pathogenic bacteria and worms in the human body.
• Contributes to the normalization of intestinal microflora.

The connection kit that is used to equip the FMS-A01 NEPTUN water treatment complex will make it easy to install for any plumbing fixture in any location.

The complex is connected permanently to the cold water supply system at the water consumption point (usually under the kitchen sink, or on the wall next to the sink) with the help of a tee and a ball valve, with a separate tap for purified water going up to the top. In this case, when opening cold water, purified water will flow in the tap.

In this case, tap water first passes through a mechanical filter. Then it is fed to the final cleaning with ion-exchange resin and carbon fiber, where the organoleptic indicators are brought to a high level.

The first flask is the largest water purification for 90% of all mechanical impurities, including the majority of bacteria and requires regularly flush dirty water into the drainage by opening the valve at the bottom of the flask.

Then purified water is supplied through the tap when the tap is opened at a speed of 13 liters per minute.

The 1st filter flask is used for fine mechanical cartridge-free cleaning up to 1 micron and pathogenic bacteria (most bacteria are larger than 1 micron)

Silver string, wound on the filter element allows you to get rid of bacteria in the flask during filtration and at the next flush are removed along with mechanical impurities into the sewage system.

Another function is implemented in the first flask – the structuring of water by rock crystal and a magnetic system, which is included in the kit of the filter element. Makes water structured, easy and beneficial to the human body.

The 2nd filter flask is intended for water softening (removal of an excessive amount of hardness salts), makes the water soft, removes completely the scum in heating appliances – the kettle. Improves the taste of water.

3rd flask – finishing water purification removes chemical contaminants.

Removes chlorine, purifies water from common substances and inorganic dissolved compounds (free chlorine, organochlorine compounds, pesticides, petroleum products, metal derivatives, derivatives and inorganic compounds), eliminates the unpleasant smell of water, gives it a taste. Improves the organoleptic characteristics of water. To make the water not only clean, but also tasty and transparent.